Description
Drone Remote Identification
New regulations in EU & US regions mandate manufacturers to equip their new drone models with technology for Direct / Broadcast remote identification (RID). Dronetag DRI is the easiest way to acquire RID technology without years of R&D and product testing. Connect our factory-ready modules to your drone’s flight controller. That’s all it takes.
Plug & Play for Pixhawk Cube or Similar
You only need one cable to add Remote ID to your aircraft. Dronetag DRI is compatible with all standard Pixhawk controllers running PX4 or Ardupilot. Plug it into your TELEM port, configure the appropriate baud rate, and you are ready to fly.
Not using MAVlink, PX4 or Ardupilot FCs? Having custom firmware? No problem; we can customize our solution to your needs.
Sophisticated UART Bypass / Forwarding
All your TELEM / serial ports already occupied and you don’t want to mess with the CAN setup and configuration? No worries, we got your back! Dronetag DRI will not take away any of your existing ports. Thanks to our UART forwarding feature, you can integrate it between the flight controller and your serial peripheral. Just enable port forwarding in Dronetag App and connect Dronetag DRI between your flight controller and serial peripheral.
Two Variations Suit Every Application
Having tight space inside your aircraft? Or do you just want to enjoy the ease of integration using internal antennas? We produce two variants of Dronetag DRI; one that comes with a U.FL connector for an external antenna and the second with an internal antenna already on board.
If you integrate DRI into carbon fiber aircraft, the U.FL variant will provide the flexibility for best performance. The internal variant will get you all you need for any outside mounting options on plastic.
Premium Support Throughout the Compliance Process
With our modules, we offer full support throughout the approval process at your local authority. We are ready to help you with the Remote ID compliance process at FAA or assist you during C-class certification. With our OEM solution, you are on a frictionless path toward the production launch of Standard Remote ID (US) and C-class (EU) drones.
Features
Flexible Mounting
Dronetag DRI is a small single-sided board, so you can either use double-sided tape or M2 screws to mount it in the desired place.Device Management via Mobile App
Forgot about disassembling your aircraft to change the settings or update the firmware. Take care of everything in our multiplatform mobile app.OTA Firmware Updates
Guarantees long-term support and future-proof solutions. New exciting features are always waiting at your fingertips.No Sensors & Battery
Module takes position data and power from your FC. Minimal impact on drones’ SWAP characteristics as the DRI module weighs 1.5 g with a size of 22.5 × 16 mm.Comes with Standardized SN
Our DRI module already has ANSI/CTA-2063-A serial number baked inside. Refer to this SN during the compliance process without worries about managing your sequence.ASD-STAN EN 4709-002 & ASTM F3411-22 compliant
Suitable for all regions adopting any of those standards. Broadcast over Bluetooth 4 & 5 to up to 3 km range (distance drone to smartphone).Upload Flight Logs Online
Dronetag DRI has external flash memory, which allows pilots to synchronize their flights with Dronetag App.Download Pixhawk Dataflash Logs
Troubleshooting customer‘s problem over a long distance? Let them wirelessly download diagnostic dataflash logs and send them to you for inspection.
