Nervous of hitting tight gaps? Don’t worry!
The TPU Bumper will keep your frame and enviroment safe, even if you manage to hit a wall or don’t make the smoothest landing
This Frame uses a super versatile camera mount.
You can mount full cameras with and without damper plate, our naked Blackmagic Pocket Cinema Camera or even a GoPro
Also it’s possible to change the position of the camera with ease.
You can mount it in the front, middle or back of the frame, to you have all the options for crazy shooting ideas.
A screwed down XT30 terminal provides ridgid 12V power for your Cinema Camera.
Because it has a solid connection to the Frame, plugging in and out is very easy and convenient.
3D Printed Parts
Many 3D printed parts make this Frame very organized and easy to maintain. You end up with a clean build where every part sits tight at its specific place. We provice parts for the AirUnit, Pololu Step-Down, SMA Connection and the Immortal-T Antenna, Crossfire receiver and many more.
Two 6s 1400mah LiPo’s fit perfectly behind the camera. Made for using the same batteries as for usual 5″ cinematic drones to get more out of your equipment! One or two LiPo straps ensure a secure hold of the batteries.
We apply conformal coating to the electronics of our BNFs, including the flight controller, ESC, receiver, and GPS during assembly. However, to prevent overheating issues, our standard process excludes coating the O3 air unit and O3 camera.
5″ Cinewhoop aka CinematiX 5
We are proud to offer the CinematiX 5 as a complete BNF with everything you need to start your own FPV journey. This setup is made and optimized for shooting professional cinematic footage with possible mounting options for different cameras. It is best paired with a naked Blackmagic and 5.2″ propellers to ensure usual flight times of 3-4 minutes instead of only 2 with a full weight camera. Since the sandwich construction provides a stiff base, the CinematiX 5 can handle some acrobatic moves despite its cinewhoop-ish look and protected propellers. It’s main area of expertise however is tight locations including people or other ‘soft targets’. The protection cage increases operational safety for anyone involved and near the place of shoot.
The components used for this build are some of the best available products on the market. They have been thoroughly tested making this the trusted Gear for any mission. Each BNF Drone is hand built, tested and tuned here in Switzerland. Please be informed this takes time – we need roughly 2 weeks to prepare your BNF.
– DJI Air Unit HD Videolink
– Polulu BEC 12V 4.5A & Wuerth capacitor for camera power via XT30
– separate Polulu BEC 12V 2.4A & Wuerth capacitor for Air Unit power
– Different cam mounting options
– 6S LiPo power
– up to 5.2″ Propellers
– conformal coating
– specific tune
– preconfigured PID profile
– preconfigured OSD
– preconfigured telemetry
– test flight performed on every drone
– BNF CinematiX incl. Camera brace (ready for naked BMPCC)
– 4 pairs of 5.2″ propellers
– 2 Kevlar LiPo Straps
– No cinema camera included!