The canopy is a one-piece print covering all the electronics and provides outstanding aerodynamic characteristics. Airflow intakes and dust protection are a must have for reliability. After printing the canopy, the nylon is vapor smoothed in a second step making the outside extremely clean – a procedure never seen before in FPV drones manufacturing.
Carbon fiber Pod structure
We have used this kind of pod structure in different frames and adopted our unique approach to the RangeX Pro. The result is a very low profile and strong carbon fiber pod with room for all components. It’s connected via highend aluminum CNC parts to add rigidity to the mainframe.
Unique GoPro position
All Frames in our RangeX family share this feature. The GoPro is mounted upside down, so the lens is the lowest point in forward flight. Why? Juicy low pass footage guaranteed! you may worry about your GoPro’s health, but crashing a longrange drone usually means losing it in unretrievable terrain. Of course GoPro angle can be changed easily as it is with all our frames.
GoPro angle adjustment
As with all our cinematic Frames, changing GoPro angle is easily done. Two thumbscrews secure the gopro from 0 -45° degrees.
The integrated AMASS XT90 connector helps to ease battery changes.
INAV is an alternative flight controller firmware which is focussed on GPS features like position Hold and return to home. The RangeX Pro is configured with INAV from the factory giving you extra safety for your longrange missions. Position hold and reliable return to home flight modes are available with our factory tune & setup. The GPS is conveniently placed under the hood without huge sacrifices in GPS satellites signal quality & quantity.
Each BNF comes with extremely bright COB LEDs that can be turned on and off from your remote controller. Never loose sight of your longrange buddy when doing co-op missions again. Epic formation flights about to be reality!
Adapting rates, accessing the flight log and changing settings is easy to do with the extended USB port for the flight controller without removing the canopy.
The O3, flight controller and ESC are cooled by a small fan sitting in the front. This makes sure the drone can sit still for a prolonged period before takeoff without compromising O3 output power or flight controller reliability. During flight, the air intakes push great airflow around all heat sensitive components.
Instead of relying on a single brand for all components, we chose the most efficient and reliable components the market has to offer for this build. The in-house quality and perfomance check each single drone goes through before shipment is extensive for highest possible reliability.
9″ LongRanger aka RangeX Pro
The RangeX Pro is out! Redefining performance, look and capabilities of longrange drones, the RangeX Pro is like nothing you have seen before. The aerodynamic hood replaces common top plate designs and reduces air resistance noticeably! The internals are well protected, the Air Unit O3 is cooled by passive and active airflow and the looks of the drone is unmatched. This is a product for professional pilots, not something every youngster has in their hangar.
Unique RangeX features are implemented into the Pro version: upside down GoPro for crazy lowpass footage, deadcat arm design for a prop-free view* and arm braces with crazy bight LEDs make the RangeX Pro a worthy member in our long range lineup.
RangeX Pro is built with the best components available, meaning we choose the best offerings from several brands. This stands in contrast to many other BNFs, which are usually built by one company exclusively using their own branded products. We know we can’t be the best in everything, so we rely on design, build and setup while choosing the best components from different Brands resulting in the ultimate efficiency, performance and long livety of our BNFs.
Each BNF Drone is hand built, tested and tuned here in Switzerland. Please be informed this takes time – we need roughly 3 weeks to prepare your BNF. First batch shipment expected end of August.
– DJI Air Unit O3 Videolink
– Optimized for carrying GoPro
– 6S LiPo power
– 9″ Propellers
– 8mm arm thickness
– RangeX Pro Frame
– XNOVA 2808 1100KV motors
– Aikon F7 FC & 6S 30×30 ESC
– TBS Crossfire Diversity
– Pololu 12V BEC & RC switch for 2x 10W COB LEDs
– TBS Triumph Pro Longrange antenna
– M10 GPS
– recommended Battery size: 6s 4500-6000mAh
– preconfigured PID profile
– preconfigured OSD
– preconfigured telemetry
– BNF RangeX Pro incl. GoPro mount
– 2 pairs of 9″ propellers
– 2 Kevlar LiPo Straps
– Sweet goodies to make your day!