Description
Naked GoPro Mission 1 Pro
Maximum image quality. Minimum weight.
The Naked GoPro Mission 1 Pro brings the full imaging performance of GoPro’s action camera to an FPV-ready 60.5 g package. By removing the original housing, battery and components that are not needed in flight, it gives cinematic, freestyle and long-range pilots more freedom without compromising the camera’s recording capabilities.
Capture detailed 8K footage, high-frame-rate 4K and flexible Open Gate video with a 1-inch sensor, 10-bit color and GP-Log2. Lower camera weight improves aircraft response, efficiency and flight time, making it equally at home on sub-250 g builds, the 2.5-inch NakeX and the 3.5-inch FlowX Mini.
Each camera is professionally converted, assembled and function-tested before shipment. The supplied USB-C PD BEC connects directly to any 2-6S battery pad and powers the camera at the required 9 V.
Prefer to build it yourself? The Naked GoPro Mission 1 Pro DIY Kit is available separately.
Top features
– 59 g without filter / 60 g with filter
– Full Mission 1 Pro recording capabilities
– 1-inch sensor with 8K60 and 8K Open Gate
– 4K recording up to 240 fps
– 10-bit color and GP-Log2
– HyperSmooth with 360-degree Horizon Lock
– 2-6S USB-C PD BEC with 9 V camera power
– Continuously running active cooling fan
– Front information display, Power and REC buttons
– MJF-printed Nylon PA12 protective housing
Kit includes
– Naked GoPro Mission 1 Pro
– power cable
– Clear lens protector
– 3D-printed slide-in mount with GoPro feet
– Horizontal/vertical aluminium mount
Every converted camera is function-tested before shipment.
Full GoPro performance at 61.5 g
Keep the image quality and creative recording modes of the Mission 1 Pro while carrying far less weight. At 60.5 g without a filter and 61.5 g with one installed, the naked conversion helps improve aircraft response, efficiency and flight time. It is a strong fit for cinematic FPV, freestyle, long-range flying and weight-sensitive sub-250 g builds.
Cinema-level image quality
A 1-inch sensor, 8K recording at up to 60 fps and 8K Open Gate give you the resolution and framing flexibility to create polished footage from demanding flights. Record 4K at up to 240 fps for dramatic slow motion, or use 10-bit color and GP-Log2 for greater control in post-production. HyperSmooth with 360-degree Horizon Lock helps turn dynamic FPV flying into stable, usable footage.
Direct 2-6S USB-C PD power
Power the camera directly from your drone without carrying a separate GoPro battery. The supplied four-layer USB-C PD BEC connects to any 2-6S battery pad, completes the required Power Delivery communication and supplies a stable 9 V to the camera. The result is a clean, purpose-built installation across a wide range of FPV platforms.
Active cooling for reliable recording
The integrated fan runs continuously to move heat away from the camera during operation. This active cooling system supports consistent performance during demanding recording sessions. For best results, always provide adequate airflow around the camera while recording.
Essential information at a glance
The front display remains in place, giving you live preview and the camera information you need before takeoff and while recording. Removing the rear touchscreen saves weight; camera setup and configuration are handled through the GoPro Labs app.
Simple, dependable controls
Dedicated Power and REC buttons make the camera easy to operate at the field, while the recording LED provides a clear visual status. Recording is started and stopped directly on the camera, keeping operation straightforward and dependable.
Naked GoPro ND filter compatible
Use standard Naked GoPro/Flywoo ND filters to control shutter speed and create natural motion blur in bright conditions. A clear lens protector is included for everyday protection. Slight corner vignetting may be visible with Naked GoPro ND filters in some modes; after stabilization, the final footage is unaffected.
Mount it your way
The MJF-printed Nylon PA12 housing follows the established Naked GoPro/Flywoo slide-in format, so the camera works with familiar FPV mounting solutions. The kit includes a 3D-printed slide-in mount with GoPro feet plus an aluminium mount for horizontal or vertical installation. Pair it with our 2.5-inch NakeX or 3.5-inch FlowX Mini for anything from indoor cinematic flying to freestyle, extreme sports and long-range capture.
Important usage information
– The naked conversion is not waterproof.
– Power the camera only through the supplied USB-C PD BEC connected to a 2-6S battery pad.
– The original GoPro manufacturer warranty no longer applies after conversion; the product is covered by our standard shop warranty.
– Crash and impact damage is not covered.
– Maintain adequate airflow around the camera during recording.
– A V30 or UHS-3 microSD card is required and is not included.
